Result in 100 minutes! Zircom SPEED

The best combination KDF machines for your FASTEST result.

Hello KDF Customers!

You can get the result in 100 minutes with KDF machines!

The Best and Fastest combination for sintering and staining / glazing time.This combination is for not only the Dental Laboratory but also the Dental office on the chair side too.

On the lab sometimes get a rush case need to delivery to the dental office until first afternoon patient coming. OR some remake rush case until next morning.

In that case, Our KDF best combination machines, 90 min Zircom Speed sintering oven and 10min Master Plus porcelain oven.

・Zirconia sintering program example for Zircom Speed (Only for 90 min fast firing zirconia material)

NOTE:Zircom Speed CARBON TRAY is available for Zircom Speed holders ONLY.Also, This Carbon tray always has TWO steps for setting up, around 10 single crowns for each tray, average total 20 crowns in one sintering. for 3 units bridge is Three bridges for each tray,average total 6 bridges in one sintering.

 

・Staining / Glazing program example for Master Plus (average 10 to 15 min)

Also, Master Plus is very compact sizing Dimensions: 10(W)×17(H)×12(D) inches, So you can put the shade taking room or patient chair side for doctors.

 

Check out KDF’s YouTube Channel

Have you ever had any trouble with our machines?

Please watch troubleshooting videos on YouTube.

Click here to Watch!

Leave a Reply